How to Get Water Out From iPhone

How to Get Water Out From iPhone Fast and Easy

Posted on

Has your iPhone ever been dropped in water? this causes the audio to soften or sound muffled, and removing the water is not easy. But fortunately, there is a simple application that can help you.

Since the 7s and 7s Plus, most iPhone models have come with IP67 dust/water resistance ratings. However, Apple didn’t include a built-in way to get water out of iPhone phones like they did with the Apple Watch starting with Series 2.When water gets into the Apple Watch speaker, the Watch will use the vibrating speaker to actually eject water, either automatically or manually.

Even with the watertight devices that iPhones have, there is no built-in tool for removing liquids. Maybe one day there will, but for now, we can simulate the Apple Watch features using Sonic, an app by developer Von Bruno.

If you have an older iPhone, such as the iPhone 5, 6, or 6s, which does not have a waterproof rating, do not use this app, as it may damage your speakers. For these models, simply place your iPhone on the absorbent cloth, speaker side down, and wait for the water to drain. This method will also work for iPhones with IP67 waterproofing, given the value, but Sonic will speed up the whole process.

How to Get Water Out From iPhone

how to get water out of iphone speaker

1. Install the Free Sonic App

If you prefer the manual method, search for “Sonic” on the iOS App Store. After installing it, you may be asked to enter your password, Touch ID, or Face ID, depending on your settings and model.

2. Get Water From Your Speaker

After opening the Sonic app, you will have several options. One way to get water out of your speakers is to select a frequency manually.

Set Frequency Manually

To do this, you have to swipe up and down to adjust the frequency (Hz), and you can tap “Start” to play a sound and continue adjusting if necessary. The ideal frequency to pass water is said to be around 165 Hz, so do your best to get the water out somewhere around it. With the frequency set in the sweet spot, the mechanical vibrational waves of pressure and displacement will rock the water.

Make sure your iPhone’s volume is at its highest, then look at your speaker. Depending on how much water there is, you should see tiny water droplets coming out of your speaker grille. You may even see some coming out of the earpiece. But even if you can’t see the water coming out, your iPhone will sound normal again immediately. Hit “Stop” each time you are done.

Use Auto Adjust

If your phone is still muffled after the 165 Hz method, Sonic has another way of getting air out of your speaker. Tap and hold the water drop icon in the center of the screen to make a frequency higher than 165 Hz, then lift your finger to call you.

The bad frequency on the screen here doesn’t affect the water drop method. Is Sonic outputting 440 Hz, 1080 Hz, or whatever? The same voice will come out through your iPhone when you speak and hold the air.

Also Read: How to Fix Troubleshooting no service error on iPhone 11

Sonic is super easy to use, and it’s definitely a must-have app if you use your iPhone a lot around water. Since this iPhone IP67 can meet being submerged in water for a period of up to 30 minutes, there is a chance that you will often use this application, because you don’t have to worry about the dreaded liquid.

One thought on “How to Get Water Out From iPhone Fast and Easy

Leave a Reply

Your email address will not be published. Required fields are marked *